RKI Instruments SDM-E2 User Manual
Page 162
157 • Instrument Function Menu
4.
Open the csv file using Notepad, Word, or WordPad. The example below
shows a csv file opened in WordPad. The list of gases are associated with the
numbers 1-5.
If there were no previously defined gases, the csv file will appear as the
following:
5.
The values in the csv file are all separated by commas. These values are in
the same order as the columns in the User-Defined Table Tab. The first value
is the gas number, the second is the gas name, etc.
6.
Edit the values you wish to change and save and close the file.
7.
Return to the SDM Docking Station PC Controller Program with the User-
Defined Table tab still up and press “Import csv file”.
8.
Choose the file you just edited and press “Open”.
Figure 119: User Defined Conversion CSV File
Figure 120: Blank User Defined Conversion CSV File