RKI Instruments SDM-E2 - Manual (Page 168)

163 • Instrument Function Menu
4. Open the csv file using Notepad, Word, or WordPad. The example below
shows a csv file opened in WordPad. The user defined PID gas is number 17.
5. The values in the csv file are all separated by commas. These values are in
the same order as the columns in the SDM Docking Station PC Controller
Program. The first value is the gas number, the second is the gas name, etc.
6. Edit the values you wish to change and save and close the file.
7. Return to the SDM Docking Station PC Controller Program with the High
Range tab still up and press “Import csv file”.
8. Choose the file you just edited and press “Open”.
9. The values you entered in the csv file will appear in the High Range tab.
10. If the program finds anything wrong with the values that were entered, the box
containing those values will turn red. Make sure that you have entered valid
characters for each field.
NOTE: The Name and Long Name for the Low Range and High Range tabs
must agree. If they do not, the program will keep the Low Range Name
and Long Name and change the High Range to agree with it.
11. Repeat step 1 - step 10 for the Low Range tab.
12. Once all of the data you wish to enter has been entered and is correct, save
the data and upload it to the EAGLE 2 by clicking OK and clicking Yes in the
confirmation window that appears.
Figure 124: CSV File