RKI Instruments SDM-E2 - Manual (Page 36)

31 • Setting Up the PC Controller Program
2. The configuration parameters are located in the Configuration Window of the
SDM Docking Station PC Controller program. To access the Configuration
Window, click the Config button along the top of the main program window.
3. You will be prompted to enter a password. The factory set password is
ABCDE. Enter the password and click OK keeping in mind that the password
is case sensitive. You may change the password using the Password Tab once
you have entered the Configuration Window. See “Password Tab” on page 180
for instructions to change the password.
4. The Parameter Tab of the Configuration Window will be displayed.
Figure 22: Config Window Parameter Tab
5. Select the Instrument Information options.
• Change Parameter
If Change Parameter is selected (factory setting), the Edit function is active
in the Instrument Function Menu allowing you to change various