RKI Instruments SDM-E2 User Manual
Page 185
Advertising
Config Window • 180
Password Tab
The password Tab allows you to change the Configuration Window password to
something other than the factory set ABCDE. It can be up to 12 characters long and
contain any letter, number, or symbol. It is case sensitive.
Figure 128: Config Window Password Tab
To change the password:
1.
Enter the new password in the top box and confirm it in the bottom. Click OK.
A window will pop up asking you to confirm the change.
•
To confirm, click Yes.
•
To exit out of Configuration Window without saving the changes, click No.
•
To stay in the Password Tab and enter a new password, click Cancel.
Advertising