RKI Instruments SDM-E2 - Manual (Page 150)

145 • Instrument Function Menu
Option 2 Sub Tab
The Option 2 Tab of the Parameter Tab contains additional parameters that can be
changed.
• Date Time Display: The Date can be displayed MM/DD/YYYY (factory setting) or
DD/MM/YYYY. Select the drop down menu and make your selection.
• LB Mode: The LB Mode selection allows you to turn on Leak Check Mode, Bar
Hole Mode, or both. If any of these modes are turned on, you will be prompted to
select an operational mode when you turn the EAGLE 2 on. The factory setting
is OFF. To update this parameter, select the drop down menu and make your
selection. See the EAGLE 2 Operator’s Manual for a description of the
operational modes.
• Language: You may change the language of your EAGLE 2 to English (factory
setting), Spanish, French, Italian, or German. Select the drop down menu and
make your selection.
• Catalytic Units: The units for the catalytic LEL channel can be set to ppm only,
%LEL only, %volume only, or Change OK (factory setting). If you choose
Change OK, you can use the RANGE
▼ SHIFT button to change the units
during operation. Select the drop down menu and make your selection.
Figure 109: Parameter Tab, Option 2