RKI Instruments SDM-E2 - Manual (Page 145)

Instrument Function Menu • 140
Sensor Tab, the Station & User Tab, the Conversion Table Tab, the PID Sensor Tab,
the Channel Gas Tab, and the Gas Name Tab. For further explanation of each tab,
see the next section.
To exit the Instrument Information Window and return to the main program window,
click Cancel.
Edit Function
This function can be activated by either right clicking an instrument and selecting
Edit(E) when the pull down menu appears or by selecting an instrument and then
using the alt/E key combination.
NOTE: The Edit function is not active and cannot be selected if the Change
Parameter selection box in the Instrument Information section of the
Parameter Tab in the Configuration Window is not selected.
Parameter Tab
The Parameter Tab is selected when the Edit function is opened. This tab allows you
to view and change various instrument parameters and settings and has information
in two sub tabs: the Option 1 Tab and the Option 2 Tab.
Figure 107: Instrument Information Window, Parameter Tab