RKI Instruments SDM-E2 - Manual (Page 204)

199 • Bump Testing Multiple EAGLE 2s with Different Sensor Configura-
• If the bump test fails and the Force Calibration box was not selected, the
following window will open indicating which channels failed the bump test.
The BUMP
T
LED on the SDM-E2 control panel will be solid red. Click OK
to return to the main program window or double click the instrument
information line to view the bump test results in the Logs window. The
BUMP
T
LED on the SDM-E2 control panel will turn off.
Figure 141: Bump Test Failed