RKI Instruments SDM-E2 - Manual (Page 163)

Instrument Function Menu • 158
9. The values you entered in the csv file will appear in the User-Defined Table.
10. If the program finds anything wrong with the values that were entered, the box
containing those values will turn red. Make sure that you have entered valid
characters for each field.
11. Once all of the data you wish to enter has been entered and is correct, save
the data and upload it to the EAGLE 2 by clicking OK and clicking Yes in the
confirmation window that appears.
PID Sensor Tab
The PID Sensor tab is used to view the pre-defined relative response gases and to
view or define the 1 user-defined relative response gas. The pre-defined gases are 1-
16 and the user defined gas is gas 17 which is highlighted in white. Every gas has a
low and high range which are displayed in the Low Range tab and High Range tab,
respectively.
There are 13 columns in both the High and Low Range tabs:
• No
This column represents the gas number. They are numbered 1-17.
Figure 121: PID Sensor Tab, High Range