RKI Instruments SDM-E2 User Manual
Page 34
29 • Overview of the SDM-E2 Docking Station PC Controller Program
Main Program Window
The main program window is where the current status of the program operation is
shown. Any SDM-E2s and EAGLE 2s that are currently connected to it and any
EAGLE 2s that have previously been but are not currently connected to it are also
shown. The program’s various functions are initiated or accessed from this screen.
The current date and time are always displayed in the lower right corner of the main
program window.
Figure 21: Parts of the Main Program Window
Control Buttons
The Cylinders, Config, Logs, and Exit control buttons are located along the top
right of the window. The Bump test and Calibration control buttons are located in
the lower right of the window along with the Force Calibration selection box. The use
of these control buttons and the Force Calibration selection box is described in other
parts of this manual.
SDM-E2/EAGLE 2 Display Area
The large middle portion of the main program window displays SDM-E2s and EAGLE
Message Area
SDM-E2/EAGLE 2
Display Area