Rockwell Automation 440C Guardmaster 440C-CR30 Configurable Safety Relay User Manual - Manual (Page 112)

112 Rockwell Automation Publication 440C-UM001C-EN-P - November 2014
Chapter 16 Security and Password
5. Click OK.
Once a password is created, any new session that tries to connect to the
safety relay has to supply the password to gain exclusive access to the target
safety relay.
6. Click OK.
Change Password
With an authorized session, you can change the password on a target safety relay
through the Connected Components Workbench software. The target safety
relay must be in Connected status.
1. On the Device Details toolbar, click the Secure button. Select Change
Password
.
The Change Safety Relay dialog appears.
IMPORTANT If you have to flash the safety relay, the project in the relay is lost. A new project
must be downloaded.