Configuring the cr30, Begin configuration, Chapter 4 – Rockwell Automation 440C Guardmaster 440C-CR30 Configurable Safety Relay User Manual User Manual
Page 25
Rockwell Automation Publication 440C-UM001C-EN-P - November 2014
25
Chapter
4
Configuring the CR30
This manual assumes that the Connected Components Workbench has been
loaded and describes basic operations. Use the online help for configuring the
safety functions.
Begin Configuration
1.
In the Device Toolbox, expand the Safety Catalog.
2.
Double-click the 440C-CR30-22BBB to open it in the Project
Organizer.
ATTENTION: Activities including installation, adjustments, putting into service,
use, assembly, disassembly, and maintenance are required to be conducted by
suitably trained personnel in accordance with applicable code of practice. If this
equipment is used in a manner that is not specified by the manufacturer, the
protection that is provided by the equipment can be impaired.