Rockwell Automation 440C Guardmaster 440C-CR30 Configurable Safety Relay User Manual - Manual (Page 113)

Rockwell Automation Publication 440C-UM001C-EN-P - November 2014 113
Security and Password Chapter 16
2. Enter the Old Password, New Password and confirm the new password.
3. Click OK.
The safety relay requires the new password to grant access to any new
session.
Clear Password
With an authorized session, you can clear the password on a target safety relay
through the Connected Components Workbench software.
1. On the Device Details toolbar, click the Secure button. Select Clear
Password
.
The Clear Password dialog appears.
2. Enter Password.
3. Click OK to clear the password.
The safety relay will require no password on any new session.
IMPORTANT Keep the password carefully. If lost, you have to flash the safety relay to reset
the password. The project in the safety relay is lost but a new project can be
downloaded.