Configuration reference document, Important user information, Appendix c – Rockwell Automation 440C Guardmaster 440C-CR30 Configurable Safety Relay User Manual User Manual
Page 139: Appendix
Rockwell Automation Publication 440C-UM001C-EN-P - November 2014
139
Appendix
C
Configuration Reference Document
The Configuration Reference Document must be stored together with technical
documentation of the machine. It includes information about the validity of a
configuration that is created for the machine. This document must be updated
anytime changes to the configuration have been made, validated, and verified.
Any new configuration or changes to an existing configuration require a
validation and verification before putting it into service. An unverified
application will stop operating after 24 hr after power-up.
With your signature you confirm that:
•
you have conducted validation and verification of the safety configuration,
identified the above mentioned details AND
•
the configuration and installation meets all specified operational and
environmental requirements of the machine to which CR30 is to be fitted
AND
•
you have read and understood the "Important User Information"
Important User Information
Read the documents that are listed in the additional resources section about
installation, configuration, and operation of this equipment before you install,
configure, operate, or maintain this product. Users are required to familiarize
themselves with installation and wiring instructions in addition to requirements
of all applicable codes, laws, and standards.
Activities including installation, adjustments, putting into service, use, assembly,
disassembly, and maintenance are required to be conducted by suitably trained
personnel in accordance with applicable code of practice. If this equipment is
used in a manner that is not specified by the manufacturer, the protection that is
provided by the equipment can be impaired.
In no event will Rockwell Automation, Inc. be responsible or liable for indirect or
consequential damages resulting from the use or application of this equipment.
Resource
Description
C-UM001_-EN-P
.
A detailed description of module functionality,
configuration, installation procedure, and information
on how to use the Guardmaster Software-Configurable
Safety Relay (440C-CR30).
Industrial Automation Wiring and Grounding Guidelines,
publication
Provides general guidelines for installing a Rockwell
Automation industrial system.