Rockwell Automation 440C Guardmaster 440C-CR30 Configurable Safety Relay User Manual - Manual (Page 92)

92 Rockwell Automation Publication 440C-UM001C-EN-P - November 2014
Chapter 13 LEDs
Input and Output LEDs To access and configure the LEDs in the CCW,
1. In the Project Organizer, double-click Guardmaster_440C-CR30*.
2. Click LED Configuration.
3. Configure the filter type and value for input and output LEDs.
First select one of four Filter Types for each LED:
1. Not Used
2. Terminal Status
3. Safety Monitoring Function Status
4. Safety Output Function Status
Then select the instance for each Filter Type.
Monitoring a function is advantageous when the input and output logic blocks
have multiple inputs or outputs. A single LED can provide status information
about multiple inputs or outputs, when it provides the status of an input or
output block.