Rockwell Automation 440C Guardmaster 440C-CR30 Configurable Safety Relay User Manual - Manual (Page 44)

44 Rockwell Automation Publication 440C-UM001C-EN-P - November 2014
Chapter 8 Safety Block Renaming
Naming Error Indication After tabbing off, pressing enter, or mousing off the block, the CCW evaluates
the integrity of the name. If valid, the name appears in black letters. If invalid, the
CCW shows a naming error in two ways:
1. A red box around the name
2. An error message in the build results
Figure 28 - Red Box Indicates Naming Error
This example block has two errors:
1. The name starts with a period (“.”).
2. The name contains a space.
Figure 29 - Build Error List
After clicking the Build button, the Error List shows the name errors. In the
example above, SMF1 and SOF1 have naming errors.
When a naming error occurs, the project cannot be built and downloaded to the
CR30. Then naming errors must be corrected. However, the project can be saved
and reopened with the naming errors.