Rockwell Automation 440C Guardmaster 440C-CR30 Configurable Safety Relay User Manual - Manual (Page 31)

Rockwell Automation Publication 440C-UM001C-EN-P - November 2014 31
Configuring the CR30 Chapter 4
21. Click Yes to change the safety relay back to Run mode.
22. The CCW generates a Safety Verification ID. Click OK to continue.
23. Confirm the Verification ID in the CCW.
The ID is stored in the CR30. During power-up, the CR30 uses this
number during its self-testing to help ensure its internal processors are
functioning properly. When the configuration is uploaded from the
CR30, the CCW shows the Verification ID.
The ID is not stored with the CCW project file.