Rockwell Automation 440C Guardmaster 440C-CR30 Configurable Safety Relay User Manual - Manual (Page 28)

28 Rockwell Automation Publication 440C-UM001C-EN-P - November 2014
Chapter 4 Configuring the CR30
Download the Configuration Download initiates the transfer of the configuration file of your CR30 project to
the CR30 safety relay. The download process automatically performs a file
transfer verification to help ensure that the project configuration and
configuration in the CR30 is valid and equal. Successful file transfer verification
allows you to change the CR30 operation mode to Run and execute the safety
function.
11. Click the Download icon to build and download the configuration to
the CR30.
12. Expand the navigation tree.
13. Select the CR30.
14. Click OK.
IMPORTANT Transfer file verification only checks inconsistency of the configuration in the
project and the relay such as connection errors and corrupted files.
After file transfer, the configured safety function itself is still not verified. The
responsible personnel must check whether the configured safety function
meets the safety requirements according to the risk assessment and fulfills all
applicable standard and regulations