Rockwell Automation MV SMC Flex Motor Controller (for Series K or later) - Manual (Page 202)

192 Rockwell Automation Publication 1560E-UM051F-EN-P - June 2013
Appendix E ArcShield Plenum Installation Instructions
STEP 5 – Extension and Elbow
Assembly The 36" Extension components and 90° Elbow Section are to be attached using
5/16-inch hardware in the following sequence:
Step 5A – See Figure 96
Step 5B – See Figure 97
Step 5C – See Figure 98
Figure 98 - 90° Elbow Section Assembly, Step 5C (Front View)
TIP The Screen Cover Plate is attached in Figure 97 .
Figure 96 - 90° Elbow Section Assembly, Step 5A (Front View) Figure 97 - 90° Elbow Section Assembly, Step 5B (Front View)
36" Extensions
2-piece 90 deg.
Elbow Section
Screen Cover Plate
The Extension components are attached to the Elbow
Section using 5/16-inch Hardware.
Figure 98 illustrates what the Extension/Elbow Assembly
should resemble when finished.
36" Extensions
Screen Cover Plate
TIP Use silicone caulking generously to fill any air gaps once the Plenum has been
securely mounted in place.