Rockwell Automation MV SMC Flex Motor Controller (for Series K or later) - Manual (Page 210)

200 Rockwell Automation Publication 1560E-UM051F-EN-P - June 2013
Appendix G Spare Parts
Table 36 - Common Parts
Table 37 - Accessories
Quantity Description Part Number
1 per SCR pair
(1)
(1) Refer to Table 33 for an explanation of the number of SCRs per controller, which is voltage dependant.
Sharing resistor 32.5 kΩ, 225W, two 2.5 kΩ taps 80025-753-01-R
1 per SCR
(1)
Current loop self-powered gate driver board (CLGD) 80190-519-01-R
1 per controller Voltage Sensing Board (VSB) 1500 V 81020-326-51-R
2500 V 81020-326-52-R
4800 V 81020-326-54-R
7200 V 81020-326-55-R
1 per controller Interface Board 80190-440-03-R
(1 per SCR) + 3
(1)
Fiber Optic Cable 2.5 m 80025-549-03-R
5.0 m 80025-549-01-R
1 per controller Test Power Supply 120 VAC for North America 80187-051-51-R
Universal 80187-245-51-R
1 per controller Current loop transformer, 50VA 115/230 : 0.6V 80022-133-01
3 per controller (2)
(2) Different lengths are used for the various configurations. The current loop total length must equal 21 ft. for proper operation.
Current loop cable assembly 5 ft. 80018-246-55
6 ft. 80018-246-51
7 ft. 80018-246-52
8 ft. 80018-246-53
9 ft. 80018-246-54
1 per controller Current loop sense CT 80022-163-01
1 per controller Ribbon cable from VSB to Interface Board 80026-146-56
2 per controller Ribbon cable from Control Module to Interface Board (6-pin) 80174-201-01
3 per controller Ribbon cable from Control Module to Interface Board (8-pin) 80174-201-02
Qty per
controller
Description Part Number
1 Control Module (Standard) 41391-454-01-S1FX
Control Module (Pump Control) 41391-454-01-B1FX
1 Fan (120 V) (1)
(1) Optional equipment.
80025-248-01-R
Fan (240 V) (1) 80025-248-02
1 Frequency to voltage converter for Tachometer
feedback
(1)
2 Hz – 10 kHz 80026-427-01
0 – 100 kHz 80026-427-02
1 Power Supply for frequency to voltage converter
(1)
80026-433-01
Fuse Extractor 80144-491-02