Rockwell Automation MV SMC Flex Motor Controller (for Series K or later) - Manual (Page 207)

Rockwell Automation Publication 1560E-UM051F-EN-P - June 2013 197
ArcShield Chimney Installation Instructions Appendix F
Chimney Placement on Structure
Once the Chimney has been lifted in place directly over the relief vent (shown in
Figure 104 ), all 1/4-20 fasteners, removed in Cabinet Preparation on page 196 ,
are replaced to attach the chimney to the top of the enclosure.
Figure 105 - Chimney Placement
TIP Use silicone caulking generously to fill any air gaps once the chimney has been
securely mounted in place.
Use recommended torque value for
1/4-20 fasteners