6ć27 – Rockwell Automation 6008-SV2R VMEbus remote I/O Scanner User Manual
Page 108
Advertising
![background image](/manuals/580456/108/background.png)
Chapter
Operating in SVĆSuperset Mode
6
6Ć27
The following diagram shows one method for applying the
LINK STATUS command:
1. get the semaphore
2. set up the control status area
3. send the command interrupt
4. wait for the result
(either poll for confirmation status or wait for an interrupt)
5. check the result
6. clear the semaphore
coding sequence
Advertising
This manual is related to the following products: