Rockwell Automation 6008-SV2R VMEbus remote I/O Scanner - Manual (Page 126)

Chapter
Operating in SVĆSuperset Mode
6
6Ć45
There are no parameters for the RESET command. Before the scanner
executes the RESET command, the VME master processor writes these
parameters to the 2 words before the VME ID area:
Byte
offset:
Parameter: Description:
1FBC secondĆtoĆlast word in the selected
channel's general data area
Write the value 0080 (hex) to this word.
1FBE last word in the selected channel's
general data area
Write the value A0A0 (hex) to this word.
Your code for the RESET command needs to write the above words to byte
offsets 1FBC and 1FBE.
parameters
coding sequence