Rockwell Automation 6008-SV2R VMEbus remote I/O Scanner - Manual (Page 183)

chap. 1
How will the scanner operate?
chap. 5
Operating in SVĆSuperset Mode
chap. 6
Scanner Overview Installing the Scanner
chap. 2
Addressing I/O
chap. 3
Communicating with Remote I/O
chap. 4
Programming the Scanner
chap. 8
Troubleshooting
chap. 9
❏ VMEbus relationship
❏ How the scanner scans
❏ Operating modes
❏ Set the switches
❏ Ground the chassis
❏ Insert the scanner
❏ Determine the power requirements
❏ Connect to remote I/O
❏ Choose the addressing mode
❏ Address block transfer modules
❏ Assign racks
❏ Select remote I/O devices
❏ Design the remote I/O link
❏ Specify the scan list
❏ Address global RAM
❏ Command summary
❏ Address global RAM
❏ Command summary
❏ Use the scanner management commands
❏ Program block transfers
❏ Communicate with PLCĆ5 adapters
❏ Check indicators
❏ Check scanner states
❏ Check error codes
❏ Other suggestions
Operating in SVĆCompatible Mode
Starting the Scanner
chap. 7
❏ Understand the scanner states
❏ Power up the scanner