Rockwell Automation 6008-SV2R VMEbus remote I/O Scanner - Manual (Page 81)

Chapter
Operating in SVĆCompatible Mode
5
5Ć30
There are no parameters for the RESET command. Before the scanner
executes the RESET command, the VME master processor writes these
parameters to the last 2 words of the selected channels’ general data area:
Byte
offset:
Parameter: Description:
FBC secondĆtoĆlast word in the selected
channel's general data area
Write the value 0080 (hex) to this word.
FBE last word in the selected channel's
general data area
Write the value A0A0 (hex) to this word.
Your code for the RESET command needs to write the above words to byte
offsets FBC and FBE.
parameters
coding sequence