Rockwell Automation 6008-SV2R VMEbus remote I/O Scanner - Manual (Page 23)

Chapter
Installing the Scanner
2
2Ć4
Table 2.A
Switch settings for SW3
This switch: configures: with these options:
switch 1, 2, 3 not used set to off
switch 4, 5 VME operating mode switch 4 switch 5
on on SV compatible
on off SV superset
off off reserved
off on reserved
switch 6 VME address space on A16
off A24
Select A24 if you select SVĆsuperset as the VME operating mode.
switch 7 how the scanner responds to
VME accesses
on responds to nonĆprivileged and supervisory VME accesses
(2D, 3D, 29, and 39 address modifiers)
off responds to supervisory VME accesses
(29 and 39 address modifiers)
switch 8 which channels are active on only channel A is active
off both channel A and B are active
this switch is ignored if you are configuring the 6008ĆSV1R