Rockwell Automation 6008-SV2R VMEbus remote I/O Scanner - Manual (Page 97)

Chapter
Operating in SVĆSuperset Mode
6
6Ć16
Figure 6.6
Example scan list
up to as many as 64 bytes
rack 0, staring group 2 rack 1, starting group 2
●
● ●
●
0220
0222
0224
0226
0221
0223
0225
0227
rack 2, staring group 2 rack 3, starting group 0
rack 4, staring group 0 rack 5 starting group 2
rack 6, staring group 0 rack 7, starting group 4
Byte
offset
Byte
offset
Figure 6.7
Format for one entry in the scan list
6 5 4 3 2 1 0 7
Format item: Description:
rack size
bits 7-6
Write one of these values:
00
1/4 rack
01 1/2 rack
10 3/4 rack
11 full rack
These bits function differently than with the AUTOCONFIGURE command.
With this command, you must specify the rack size you want - which could be
larger than the actual rack size to allow for future expansion. The
AUTOCONFIGURE command determines the actual rack size and writes the
appropriate value.
rack number
bits 5-2
Write the value (0-15 binary) of the rack number to be scanned.
starting I/O group number
bits 1-0
Write one of these values:
00
group 0
01 group 2
10 group 4
11 group 6