Preface, Reface – Rockwell Automation GV3000/SE 230VAC 1-20 HP GP & Vector Drive Ver. 6.04 Software Start-Up and Ref. User Manual
Page 13
VII
Preface
P
REFACE
This manual is a start-up and programming reference guide for the version 6.04
GV3000/SE (Sensorless Enhanced) drive. The drive can be set up for either volts
per hertz (V/Hz) or vector regulation. This manual provides a start-up procedure for
both.
The start-up procedures are followed by reference information. This information
includes a complete list of all parameters and a description of the keypad/display.
•
You will need to know to use the keypad to perform the start-up procedures
described in chapters 1 and 2. If you do not, refer to chapter 3 first.
•
For drives that will be set up for V/Hz regulation, go to chapter 1 for the start-up
procedure.
•
For drives that will be set up for vector regulation, go to chapter 2 for the start-
up procedure.
•
For a description of all the parameters, go to chapter 4.
•
For troubleshooting guidelines, go to chapter 5.
•
For a description of the drive hardware, refer to the GV3000/SE 230 VAC 1-20
HP Drive Hardware Reference, Installation, and Troubleshooting instruction
manual (D2-3388).
Getting assistance from Reliance Electric
If you have any questions or problems with the products described in this insruction
manual, contact your local Reliance Electric sales office. For technical assistance,
call 1-800-726-8112.