Rockwell Automation GV3000/SE 230VAC 1-20 HP GP & Vector Drive Ver. 6.04 Software Start-Up and Ref. - Manual (Page 62)

2-24 GV3000/SE 230 VAC Drive, Software Reference Version 6.04
Step 6.29 Press the ENTER key to display the default setting of U.007.
This displays the default setting for the Motor
Nameplate Volts. The default setting is 230.
Step 6.30 Press the £ key or the ¥ key to increase or decrease the motor
nameplate volts.
The adjustment range is:
180 to 690 Volts
VALUE ENTERED:
Step 6.31 Press the ENTER key to save the displayed value.
After pressing ENTER, the same parameter
is displayed. You can now move to the next
parameter.
AUTO
MAN
Forward
Reverse
PROGRAM
RUN
JOG
STOP
RESET
START
ENTER
SPEED
VOLTS
AMPS
Hz
Kw
TORQUE
Password RUNNING
REMOTE
JOG
AUTO
FORWARD
REVERSE
PROGRAM
Step 6.32 Press the £ key to display U.022, Motor Nameplate Horsepower.
This parameter specifies the motor
horsepower as it appears on the motor
nameplate.
AUTO
MAN
Forward
Reverse
PROGRAM
RUN
JOG
STOP
RESET START
ENTER
SPEED
VOLTS
AMPS
Hz
Kw
TORQUE
Password RUNNING
REMOTE
JOG
AUTO
FORWARD
REVERSE
PROGRAM
AUTO
MAN
Forward
Reverse
PROGRAM
RUN
JOG
STOP
RESET
START
ENTER
SPEED
VOLTS
AMPS
Hz
Kw
TORQUE
Password RUNNING
REMOTE
JOG
AUTO
FORWARD
REVERSE
PROGRAM