Rockwell Automation GV3000/SE 230VAC 1-20 HP GP & Vector Drive Ver. 6.04 Software Start-Up and Ref. - Manual (Page 48)

2-10 GV3000/SE 230 VAC Drive, Software Reference Version 6.04
Step 5.8 Press the ENTER key to display the default setting of the P.002.
This displays the default setting for
deceleration time (20.0 seconds).
AUTO
MAN
Forward
Reverse
PROGRAM
RUN
JOG
STOP
RESET
START
ENTER
SPEED
VOLTS
AMPS
Hz
Kw
TORQUE
Password RUNNING
REMOTE
JOG
AUTO
FORWARD
REVERSE
PROGRAM
Step 5.9 Press the £ key to increase deceleration time, or the ¥ key to decrease
deceleration time.
The adjustment range is:
0.1 to 999.9 seconds.
VALUE ENTERED:
Step 5.10 Press the ENTER key to save the changed value.
After pressing ENTER, the same parameter
number is displayed. You can now go to the
next parameter.
AUTO
MAN
Forward
Reverse
PROGRAM
RUN
JOG
STOP
RESET
START
ENTER
SPEED
VOLTS
AMPS
Hz
Kw
TORQUE
Password RUNNING
REMOTE
JOG
AUTO
FORWARD
REVERSE
PROGRAM