Rockwell Automation GV3000/SE 230VAC 1-20 HP GP & Vector Drive Ver. 6.04 Software Start-Up and Ref. User Manual

Page 184

Advertising

5-6

GV3000/SE 230 VAC Drive, Software Reference Version 6.04

5.3

Accessing, Reading, and Clearing the Faults in the Error
Log

The following procedure shows how to access and clear the error log. Note that you
cannot clear a single entry from the error log. The entire log, including all the fault
codes and the day and time stamp of each fault, will be cleared simultaneously
using this procedure.

Step 1. Press the PROGRAM key.

The First Menu General parameters are
displayed. The PROGRAM LED will turn on.

Step 2. Press the

key until Err is displayed.

Table 5.2 List of Fault Codes (Continued)

Fault

Description

Spurious host PC
comm interrupt

Asymmetrical bus
charge

Code

UAr

UbS

Fault Cause

Regulator board failure.

Bad Power Module.

Corrective Action

Replace Regulator board.

Contact Reliance.

AUTO

MAN

Forward
Reverse

PROGRAM

RUN
JOG

STOP

RESET

START

ENTER

SPEED
VOLTS
AMPS
Hz
Kw
TORQUE
Password

RUNNING
REMOTE
JOG
AUTO
FORWARD
REVERSE
PROGRAM