Rockwell Automation 20D PowerFlex 700S AC Drives with Phase II Control Reference Manual - Manual (Page 34)

34 Rockwell Automation Publication PFLEX-RM003E-EN-E - January 2011
Chapter 1 Detailed Drive Operation
Figure 5 - Reading Floating Point Datalinks in an SLC or PLC 5.
Figure 6 - Writing Floating Point Datalinks in an SLC or PLC 5.
Copy Cat This feature allows you to upload a complete set of parameters to the LCD HIM.
This information can then be used as backup or can be transferred to another
drive by downloading the memory in the HIM. Generally, the transfer process
manages all conflicts. If a parameter from HIM memory does not exist in the
target drive, the value stored is out of range for the drive, or the parameter cannot
be downloaded because the drive is running, the download will stop and a text
message will be issued. The user than has the option of completely stopping the
download or continuing after noting the discrepancy for the parameter that could
not be downloaded. These parameters can then be adjusted manually. The LCD
HIM will store a number of parameter sets (memory dependant) and each
individual set can be named for clarity.