Using driveexecutive – Rockwell Automation 20D PowerFlex 700S AC Drives with Phase II Control Reference Manual User Manual
Page 67
Advertising
![background image](/manuals/581691/67/background.png)
Rockwell Automation Publication PFLEX-RM003E-EN-E - January 2011
67
Detailed Drive Operation Chapter 1
Using DriveExecutive
To link parameters using DriveExecutive, complete the following steps.
1.
Double-click on the destination parameter in the parameter list.
The parameter XX edit dialog box displays.
2.
Click the Link Source tab.
3.
Click the Parameter radio button and select the desired source parameter
in the Selected Parameter field.
Advertising