Dell PowerVault MD3420 - Manual (Page 137)

12
Commands Listed Alphabetically
Following are the script commands listed alphabetically.
Activate Remote Replication Feature
NOTE: This command is used to activate both Remote Replication and Remote Replication
(Legacy).
Description
This command creates the replication repository virtual disks and activates the Remote Replication and
Remote Replication (legacy) premium features. When using this command, the replication repository
virtual disk can be defined in one of three ways:
• User-defined physical disks
• User-defined disk group
• User-defined number of physical disks
If you define a number of physical disks, the RAID controller module firmware selects which physical
disks to use for the replication repository volume.
Syntax
User-Defined Physical Disks
activate storageArray feature=remoteReplication
repositoryRAIDLevel=(0 |1 | 3 | 5 | 6)
repositoryPhysicalDisks=(enclosureID1,drawerID1,slotID1 ...
enclosureIDn,drawerIDn,slotIDn)
repositoryDiskGroupUserLabel="diskGroupName"
[enclosureLossProtect=(TRUE | FALSE)]
[drawerLossProtect=(TRUE | FALSE)]
[dataAssurance=(none | enabled)]
User-Defined Disk Group
activate storageArray feature=remoteReplication
repositoryDiskGroup=diskGroupName
[freeCapacityArea=freeCapacityIndexNumber]
User-Defined Number Of Physical Disks
activate storageArray feature=remoteReplication
repositoryRAIDLevel=(1 | 3 | 5 | 6)
repositoryPhysicalDiskCount=numberOfPhysicalDisks
repositoryDiskGroupUserLabel=[diskGroupName]
[enclosureLossProtect=(TRUE | FALSE)]
[drawerLossProtect=(TRUE | FALSE)] [dataAssurance=(none | enabled)]
137