Dell PowerVault MD3420 - Manual (Page 244)

Parameter Description
name. Enclose the virtual disk name in square
brackets ([ ]). If the virtual disk name has special
characters, you also must enclose the virtual disk
name in double quotation marks (" ").
Remove Virtual Disk Copy
Description
This command removes a virtual disk copy pair.
Syntax
remove virtualDiskCopy target [targetName]
[source [sourceName]]
copyType=(online | offline)
Parameters
Parameter Description
target Name of the target virtual disk to remove. You
must put brackets ([ ]) around the target virtual disk
name. If the target virtual disk name has special
characters, you must also put quotation marks (" ")
around the target virtual disk name.
source Name of the source virtual disk to remove. You
must put brackets ([ ]) around the source virtual
disk name. If the source virtual disk name has
special characters, you must also put quotation
marks (" ") around the source virtual disk name.
copyType Identifies a virtual disk copy with a snapshot. If the
virtual disk copy has an online copy snapshot, set
this parameter to online. If the virtual disk copy
does not have a snapshot, set this parameter to
offline.
Remove Virtual Disk From Remote Replication Group
Description
This command removes a member virtual disk from an existing remote replication group. Optionally, you
can delete the repository virtual disk members from the remote replication group.
This command is valid only on the local storage array that contains the remote replication group whose
member virtual disk that you want to remove.
Syntax
remove virtualDisk ["virtualDiskName"]
asyncRemoteReplicationGroup="asyncRemoteReplicationGroupName"
[deleteRepositoryMembers=(TRUE | FALSE)]
244