Dell PowerVault MD3420 - Manual (Page 363)

Show Virtual Disk Copy
Description
This command returns information about virtual disk copy operations. The following information is
returned:
• Copy status
• Start timestamp
• Completion timestamp
• Copy priority
• Source virtual disk WWID or target virtual disk WWID
• Read-only attribute setting of the target virtual disk
You can retrieve information about a specific virtual disk copy pair or all virtual disk copy pairs in the
storage array.
Syntax
show virtualDiskCopy (allVirtualDisks |
source ["sourceName"] |
target ["targetName"])
Parameters
Parameter Description
allVirtualDisks Returns information about virtual disk copy
operations for all virtual disk copy pairs.
source Name of the source virtual disk about which to
retrieve information. You must put quotation marks
(" ") and brackets ([ ]) around the source virtual disk
name. The source virtual disk name and quotation
marks must be inside the brackets.
target Name of the target virtual disk about which to
retrieve information. You must put quotation marks
(" ") and brackets ([ ]) around the target virtual disk
name. The target virtual disk name and quotation
marks must be inside the brackets.
Show Virtual Disk Copy Source Candidates
Description
This command returns information about the candidate virtual disks that you can use as the source for a
virtual disk copy operation.
Syntax
show virtualDiskCopy sourceCandidates
363