Dell PowerVault MD3420 - Manual (Page 303)

Parameter Description
the storage array level, this parameter has no
effect.)
consistencyCheckEnabled The setting to turn on or turn off consistency
checking during a media scan. To turn on
consistency checking, set this parameter to TRUE.
To turn off consistency checking, set this
parameter to FALSE.
Set Snapshot Group Repository Virtual Disk Capacity
Description
This command increases or decreases the capacity of a snapshot group repository virtual disk.
Syntax For Increasing Capacity
set snapGroup ["snapGroupName"]
increaseRepositoryCapacity repositoryVirtualDisks=(repos_xxxx)
Syntax For Decreasing Capacity
set snapGroup ["snapGroupName"]
decreaseRepositoryCapacity count=numberOfVirtual disks
Parameters
Parameter Description
snapGroup The alphanumeric identifier (including - and _) of
the snapshot group on which you want to run a
media scan. Enclose the snapshot group name in
double quotation marks (" ") inside of square
brackets ([ ]).
repositoryVirtualDisk The name of the repository virtual disk for which
you want to increase capacity. An available
standard virtual disk is added to the repository
virtual disk to increase the capacity of the
repository virtual disk.
The repository virtual disk name is comprised of
two parts:
• The term repos
• A numerical identifier generated by the MD
storage management software and the
firmware
count The number of repository virtual disks that you
want to remove from the snapshot group. Use
integer values.
303