Dell PowerVault MD3420 - Manual (Page 334)

Parameter Description
to TRUE. To let the physical disks stay spinning, set
this parameter to FALSE.
NOTE: This command returns the dependencies of a specific disk group, which must be in an
Exported state or a Forced state. If a decision is made to retain the listed dependencies, then the
cancelImport parameter can be enforced to spin the physical disks back down. You must run the
show diskGroup importDependencies command before you run the start diskGroup
import command.
Show Disk Pool
Description
This command returns information on the used and free capacity and other properties for the disk pool.
Syntax
show diskPool [diskPoolName]
Parameter
Parameter Description
diskPool The alphanumberic identifier of the disk pool
(including – and _) that you want to set to a
Complete state. Enclose the diskPoolName in
square brackets ([ ]).
Show Host Ports
Description
For all HBA host ports connected to a storage array, this command returns the following information:
• HBA host port identifier
• HBA host port name
• HBA host type
Syntax
show allHostPorts
Parameters
None.
Additional Information
This command returns HBA host port information similar to this example.
334