Download storage array physical disk firmware, Description, Syntax – Dell PowerVault MD3420 User Manual

Page 223: Parameter, Additional information

Advertising
background image

Parameter

Description

downgrade to TRUE if you want to download an
earlier version of firmware.

activateNow

Activates the firmware and NVSRAM images. The

default value is TRUE. If you set activateNow to
FALSE, you must use the activate
storageArray firmware command to activate

the firmware and NVSRAM values at a later time.

Download Storage Array Physical Disk Firmware

Description

This command downloads firmware images to all of the physical disks in the storage array.

Syntax

download storageArray physicalDiskFirmware file= ”filename

[file=”filename2”... file=”filenameN”]

Parameter

Parameter

Description

file

File path and name of the file that contains the
firmware. Valid file names must end with a .dlp
extension. You must put quotation marks (" ")
around the file name.

Additional Information

When you run this command, you can download more than one firmware image file to the physical disks
in a storage array. The number of firmware image files that you can download depends on the storage
array. The MD storage management software returns an error if you try to download more firmware
image files than the storage array can accept.
You can schedule downloads for multiple physical disks at the same time, including multiple physical
disks in a redundant disk group. Each firmware image file contains information about the physical disk
types on which the firmware image runs. The specified firmware images can be downloaded only to a
compatible physical disk. Use the download physicalDisk firmware command to download a
firmware image to a specific physical disk.
The download storageArray physicalDiskFirmware command blocks all I/ O activity until a
download try has been made for each candidate physical disk or you run the stop storageArray
downloadPhysicalDiskFirmware command. When the download storageArray
physicalDiskFirmware command finishes downloading the firmware image, each candidate physical
disk shows the download status for each physical disk. One of these statuses is returned:

• Successful
• Unsuccessful With Reason
• Never Attempted With Reason

223

Advertising