Dell PowerVault MD3420 - Manual (Page 357)

Show Storage Array LUN Mappings
Description
This command returns information from the storage array profile about the storage array LUN mappings.
If you run this command with no parameters, this command returns all LUN mappings.
Syntax
show storageArray lunMappings [host ["hostName"] |
hostgroup ["hostGroupName"]]
Parameters
Parameter Description
host Name of a specific host for which to see the LUN
mappings. You must put quotation marks (" ") and
brackets ([ ]) around the host name. The host name
and quotation marks must be inside the brackets.
hostGroup Name of a specific host group for which to see the
LUN mappings. You must put quotation marks (" ")
and brackets ([ ]) around the host group name. The
host group name and quotation marks must be
inside the brackets.
Show Storage Array Negotiation Defaults
Description
This statement returns information about connection-level settings that are subject to initiator-target
negotiation.
Syntax
show storageArray iscsiNegotiationDefaults
Parameters
None.
NOTE: Information returned includes RAID controller module default settings (settings that are the
starting point for negotiation), and the current active settings.
357