Dell PowerVault MD3420 - Manual (Page 362)

Parameters
Parameter Description
allvirtualDisks The setting to return information about all of the
virtual disks in the storage array.
virtualDisk or virtualDisks The name of the specific virtual disk for which you
are retrieving information. You can enter more
than one virtual disk name. Enclose the virtual disk
name in square brackets ([ ]). If the virtual disk
name has special characters, you also must
enclose the virtual disk name in double quotation
marks (“ ”).
summary The setting to return a concise list of information
about the virtual disks.
Notes
For snapshot virtual disk copies, the show virtualDisk command returns information about the
schedules for the snapshot virtual disk copies. The schedule information is in this form:
Schedule State: "Active" | "Disabled" | "Completed"
Last Run Time: <mm/dd/yyyy> <hh:mm a.m. | p.m.>
Next Run Time: <mm/dd/yyyy> <hh:mm a.m. | p.m.>
Start Date: <mm/dd/yyyy> End Date: <mm/dd/yyyy> | "No End Date"
End Date:
Days of Week: <Sunday - Saturday>, <Sunday - Saturday>, ….
Times for snapshot recreate: <hh:mm a.m. | p.m.>, <hh:mm a.m. | p.m.>
Show Virtual Disk Action Progress
Description
For a long-running operation that is currently running on a virtual disk, this command returns information
about the virtual disk action and amount of the long-running operation completed. The completed
amount of the long-running operation is shown as a percentage (for example, 25 means that 25 percent
of the long-running operation is completed).
Syntax
show virtualDisk ["virtualDiskName"] actionProgress
Parameters
Parameter Description
virtualDisk Name of the virtual disk running the long ‑running
operation. You must put quotation marks (" ") and
brackets ([ ]) around the virtual disk name.
The virtual disk name and quotation marks must be
inside the brackets.
362