Save storage array events, Description, Syntax – Dell PowerVault MD3420 User Manual

Page 270: Parameters

Advertising
background image

</Trailer>

</DbmImageMetadata>

Save Storage Array Events

Description

This command saves events from the Major Event Log (MEL) to a file.
Any or all of the following events can be saved:

• Critical events—Errors occurring on the storage array that needs to be addressed immediately. Loss of

data access may occur if the error is not immediately corrected.

• Warning events—Errors occurring on the storage array resulting in degraded performance or reduced

ability to recover from additional errors. Access to data has not been lost, but the must be corrected

to prevent possible loss of data access in the event of an additional error.

• Informational events—Events occurring on the storage array that do not impact normal operations.

This event is reporting a change in configuration or other information useful in evaluating the

performance of the storage array.

• Debug events—Events occurring on the storage array that provides information useful in determining

steps or states that led to the error. This information may be useful to your Technical Support

representative in helping determine error causes.

NOTE: Some storage arrays may be unable to support all the above mentioned types of events.

Syntax

save storageArray (allEvents | criticalEvents warningEvents

| infoEvents | debugEvents)

file="filename" [count=numberOfEvents

forceSave=(TRUE | FALSE)]

Parameters

Parameter

Description

allEvents

Saves all events to a file.

criticalEvents

Saves only critical events to a file.

warningEvents

Saves only warning events to a file.

infoEvents

Saves only informational events to a file.

debugEvents

Saves only debug events to a file.

file

Specifies name of the file to which to save the
events. You must put quotation marks (" ") around
the file name.

count

Specifies the number of events or critical events to
save to a file. If you do not enter a value for the
count, all events or critical events are saved to the
file. If you enter a value for the count, only that
number of events or critical events (starting with

270

Advertising