Dell PowerVault MD3420 - Manual (Page 148)

Parameter Description
cache. Valid values are webServer, dataBase, or
fileSystem.
Check Remote Replication Status
NOTE: This command valid only with Fibre Channel storage arrays.
Description
This command returns the status of a remote replication virtual disk. Use this command to determine
when the status of the remote replication virtual disk becomes Optimal.
Syntax
check remoteReplication localVirtualDisk [virtualDiskName]
optimalStatus timeout=timeoutValue
Parameters
Parameter Description
localVirtualDisk The name of any remote replication virtual disk.
The remote replication virtual disk can be the
primary virtual disk or the secondary virtual disk of
a remote replication pair. Enclose the virtual disk
name in square brackets ([ ]). If the virtual disk
name has special characters, you also must
enclose the virtual disk name in double quotation
marks (" ").
timeout The time interval within which the software can
return the remote replication virtual disk status.
The timeout value is in minutes.
NOTE: This command waits until the status becomes Optimal or the timeout interval expires.
Check Remote Replication Group Consistency
Description
This command applies to a remote replication group that has underlying repository virtual disks. The
command produces a report based on analysis of the data in the repository.
Syntax
check asyncRemoteReplicationGroup[asyncRemoteReplicationGroupName]
repositoryConsistency localVirtualDisk=["localVirtualDiskName"]
file="filePath"
148