Dell PowerVault MD3420 - Manual (Page 147)

Cancel Remote Replication Group Role Reversal
Description
This command cancels a pending role reversal operation between remote replication groups.
Syntax
stop asyncRemoteReplicationGroup ["asyncRemoteReplicationGroupName"] rolechange
Parameter
Parameter Description
asyncRemoteReplicationGroup The name of the remote replication group for
which you want to cancel the pending role reversal
operation. Enclose the remote replication group
name in square brackets ([ ]). If the remote
replication group name has special characters, you
also must enclose the remote replication group
name in double quotation marks (" ").
Change SSD Cache Application Type
Description
This command changes the application type associated with the SSD cache. The application type can be
web server, database, or multimedia. Changing the application type changes the block size, sub block
size, populate on read threshold, and populate on write threshold for the virtual disks underlying the SSD
cache.
Syntax
set ssdCache [ssdCacheName] usageHint=(webServer|dataBase|fileSystem)
Parameters
Parameter Description
ssdCache The alphanumeric identifier (including - and _) of
the SSD cache for which you want to change the
application type. Enclose the identifier in square
brackets ([ ]). If the SSD cache name contains
special characters or consists only of numbers, you
also must enclose the identifier in double
quotation marks (" ") inside square brackets.
usageHint The values are based on the typical I/O usage
pattern of the application that is using the SSD
147