Dell PowerVault MD3420 - Manual (Page 208)

Syntax
delete hostPort [hostPortName]
Parameter
Parameter Description
hostPort Name of the HBA host port to delete. You must put
brackets ([ ]) around the name of the HBA host
port.
NOTE: An HBA host port is a physical
connection on a host bus adapter that resides
within a host system. An HBA host port
provides a host access to the virtual disks in a
storage array. If the host bus adapter has only
one physical connection (one host port), the
terms HBA host port and host bus adapter are
synonymous.
Example
-c "delete host [\"job2900\"];"
Delete iSCSI Initiator
Description
This command deletes a specific iSCSI initiator object.
Syntax
delete iscsiInitiator (["iSCSI-ID "| "name"])
Parameters
Parameters Description
iSCSI-ID
The identifier of the iSCSI initiator that you want to
delete. Enclose the name in double quotation
marks (" ").
name
The name of the iSCSI initiator that you want to
delete. Enclose the name in double quotation
marks (" ").
Example
-c "delete iscsiInitiator [\"job29002\"];"
208