Dell PowerVault MD3420 - Manual (Page 353)

Parameters
Parameter Description
profile Displays all properties of the logical and physical
components that comprise the storage array.
The information returned takes several screens
to display.
NOTE: The profile parameter returns detailed
information about the storage array. The
information covers several screens on a
display. You might need to increase the size of
your display buffer to see all the information.
Because this information is so detailed, you
might want to save the output of this
parameter to a file. To save the output to a
file, enter the show storageArray
command similar to the following:
smcli 123.45.67.89 -c "show
storagearray profile;" -o "c:\folder
\storagearray profile.txt"
NOTE: The previous command syntax is for a
host running Windows. The actual syntax
varies depending on your operating system.
autoSupportConfig The parameter to return information about the
current state of the operation to automatically
collect support data. The information this
parameter returns is:
• Whether the operation is enabled or disabled
• The location of the folder where the support
data file is located
batteryAge Displays the status, the age of the battery in days,
and the number of days until the battery needs to
be replaced.
connections Displays a list of the drive channel port locations
and the drive channel connections.
defaultHostType Displays the default host type and host type index.
healthStatus Displays the health, logical properties, and physical
component properties of the storage array.
hostTypeTable Displays a table of all host types known to the RAID
controller module. Each row in the table displays a
host type index and the platform the index
represents.
353