Dell PowerVault MD3420 - Manual (Page 388)

Parameter Description
Enclose the virtual disk name in square brackets
([ ]). If the virtual disk name has special characters
or numbers, you must enclose the virtual disk
name in double quotation marks (" ") inside square
brackets.
virtualDisks The names of several snapshot (legacy) virtual disks
for which you want to stop a rollback operation.
Enter the namesvirtual disks using these rules:
• Enclose all names in square brackets ([ ]).
• Separate each name with a space.
If the virtual disk names have special characters or
numbers, enter the names using these rules:
• Enclose all names in square brackets ([ ]).
• Enclose each name in double quotation marks
(" ").
• Separate each name with a space.
Stop Snapshot Rollback
Description
This command stops a snapshot rollback operation that was initiated by the start rollback virtual disk
command.
NOTE: Canceling a rollback operation leaves the base virtual disk in an indeterminate state with
potentially invalid or inconsistent data. The related snapshot virtual disk becomes disabled and
unusable.
Syntax
stop rollback virtualDisk [snapshotVirtualDiskName]
Parameters
Parameter Description
virtualDisk Names the specific snapshot virtual disk for which
you want to resume a rollback operation. Enclose
the snapshot virtual disk name in square brackets
([ ]). If the snapshot virtual disk name has special
characters, you must also enclose the snapshot
virtual disk name in double quotation marks (" ").
388