Dell PowerVault MD3420 - Manual (Page 365)

Parameters
Parameter Description
allvirtualDisks The setting to return performance statistics about
all of the virtual disks in the storage array.
virtualDisk or virtualDisks Name of the source virtual disk for which you are
trying to find a candidate target virtual disk. You
must put quotation marks (" ") and brackets ([ ])
around the source virtual disk name. The source
virtual disk name and quotation marks must be
inside the brackets.
Show Virtual Disk Reservations
Description
This command returns information about the virtual disks that have persistent reservations.
Syntax
show (allVirtualDisks | virtualDisk [virtualDiskName]
|
virtualDisks [virtualDiskName1... virtualDiskNameN] reservations
Parameters
Parameter Description
allVirtualDisks Returns reservation information about all virtual
disks in the storage array.
virtualDisk or virtualDisks Name of the specific virtual disk for which you are
retrieving reservation information. You can enter
more than one virtual disk name. You must put
brackets ([ ]) around the virtual disk name. If the
virtual disk name has special characters, you must
also put quotation marks (" ") around the virtual
disk name.
Start Configuration Database Diagnostic
Description
This command starts a diagnostic test to validate the configuration database in the RAID controller
module firmware.
Syntax
start storageArray configDbDiagnostic
365