Dell PowerVault MD3420 - Manual (Page 313)

Additional Information
This command defines the position of an enclosure in a storage array by the position of the enclosure ID
in the enclosurePositions list. For example, if you have a RAID enclosure with an ID set to 84 and
expansion enclosures with IDs set to 1, 12, and 50, the enclosurePositions sequence (84 1 12 50)
places the RAID enclosure in the first position, expansion enclosure 1 in the second position, expansion
enclosure 12 in the third position, and expansion enclosure 50 in the fourth position. The
enclosurePositions sequence (1 84 50 12) places the RAID enclosure in the second position,
expansion enclosure 1 in the first position, expansion enclosure 50 in the third position, and expansion
enclosure 12 in the fourth position.
NOTE: You must include all of the enclosures in the storage array in the list defined by the
enclosurePositions parameter. If the number of enclosures in the list does not match the total
number of enclosures in the storage array, an error message is shown.
Set Storage Array ICMP Response
Description
This command returns the default values for negotiable settings for sessions and connections, which
represent the starting point for the storage array for negotiations.
Syntax
set storageArray icmpPingResponse=(TRUE | FALSE)
Parameter
Parameter Description
icmpPingResponse This parameter turns on or turns off Echo Request
messages. Set the parameter to TRUE to turn on
Echo Request messages. Set the parameter to
FALSE to turn off Echo Request messages.
Set Storage Array iSNS Server IPv4 Address
Description
This command sets the configuration method and address for an IPv4 Internet Storage Name Service
(iSNS).
Syntax
set storageArray isnsIPv4ConfigurationMethod=[static | dhcp]
isnsIPv4Address=ipAddress
313