Dell PowerVault MD3420 - Manual (Page 300)

additional standard virtual disks to it. The composite expandable repository virtual disk capacity then
becomes the sum of the capacities of all of the concatenated standard virtual disks.
A remote replication group repository virtual disk must satisfy a minimum capacity requirement that is the
sum of the following:
• 32 MB to support fixed overhead for the remote replication group and for copy-on-write processing.
• Capacity for rollback processing, which is 1/5000th of the capacity of the base virtual disk.
The minimum capacity is enforced by the RAID controller module firmware and the MD storage
management software.
Set Session
Description
This command defines how you want the current script engine session to run.
Syntax
set session errorAction=(stop | continue)
password=”storageArrayPassword”
performanceMonitorInterval=intervalValue
performanceMonitorIterations=iterationValue
Parameters
Parameter Description
errorAction How the session responds if an error is
encountered during processing. You can choose
to stop the session if an error is encountered, or
you can continue the session after encountering
an error. The default value is stop. (This parameter
defines the action for execution errors, not syntax
errors. Some error conditions might override the
continue value.)
password The password for the storage array. Enclose the
password in double quotation marks (“ ”).
performanceMonitorInterval The frequency of gathering performance data.
Enter an integer value for the polling interval, in
seconds, for which you want to capture data. The
range of values is 3 to 3600 seconds. The default
value is 5 seconds.
performanceMonitorIterations The number of samples to capture. Enter an
integer value. The range of values for samples
captured is 1 to 3600. The default value is 5.
Additional Information
When you use this command, you can specify one or more of the optional parameters.
300