Dell PowerVault MD3420 - Manual (Page 197)

NOTE: You cannot use this command for a snapshot image that is used in online virtual disk copy.
Syntax
create snapVirtualDisk userLabel="snapVirtualDiskName" snapImageID="snapImageID"
[repositoryVirtualDisk="repos_xxxx" |
repositoryFullLimit=percentValue]
Parameters
Parameter Description
userLabel The alphanumeric identifier (including - and _) that
you want to give to a snapshot virtual disk. Enclose
the snapshot virtual disk name in double quotation
marks (" ").
snapImageID The alphanumeric identifier of a snapshot image
that you want to add to the new snapshot virtual
disk. The identifier of a snapshot image is
comprised of two parts:
• The name of the snapshot group.
• An identifier for the snapshot image in the
snapshot group.
The identifier for the snapshot image can be one of
these:
• An integer value that is the sequence number
of the snapshot in the snapshot group.
• NEWEST - Use this option when you want to
show the latest snapshot image created in the
snapshot group.
• OLDEST - Use this option when you want to
show the earliest snapshot image created in the
snapshot group.
Enclose the snapshot image name in double
quotation marks (" ").
repositoryVirtualDisk The alphanumeric identifier of the repository virtual
disk has the snapshot image. All repository
identifiers have this form: repos_xxxx
where xxxx represents a four digit numerical value.
Enclose the snapshot virtual disk name in double
quotation marks (" ").
repositoryFullLimit The percentage of repository capacity at which
you receive a warning that the snapshot repository
virtual disk is nearing full. Use integer values. For
example, a value of 70 means 70 percent. The
default value is 75.
197